Sr Manufacturing Mechanic/ Sr Craftsworker

Job description

  Job facts

SHIFT—5 days (MON- FRI) / 8 hour shift pattern 7:00 AM until 3:30 PM.

ESSENTIAL JOB FUNCTIONS & MAJOR CONTRIBUTIONS

·  Position is responsible for maintaining, repairing and the changing over of filling, labeling, assembly and packaging equipment.
·  Performs, assists with, or coordinates a wide range of operations connected with the installation, removal, repair, alteration and maintenance of all types of mechanical, electrical, plumbing, and other utility systems.
·  Document Maintenance activities using SAP Plant Maintenance system. Oversee and coordinate the activities of a wide range of Facilities Management service providers. Must carry a cell phone and/or pager and be available to provide 24 hour 'on-call' support for site emergencies on a rotating basis as required by local Facilities Management. May be assigned to act as primary or back-up SAP Plant Maintenance Coordinator.
·  Coordinates and assists with conference room and special event planning and set-up.
·  Develop, monitor and control annual budgets for assigned maintenance and repair services. This includes budgets associated with internally performed maintenance and external service providers. Oversees execution of small expense and capital projects as assigned.
·  Monitor and update as required various administrative systems including, but not limited to, SAP Learning Solution.
·  Performs masonry, plumbing, piping and utility equipment repairs, carpentry tasks, general construction and maintenance activities required for maintenance of buildings, hardware and mechanical systems. Performs construction and project-assist services as required: renovation, rebuilding, and parts replacement.
·  Completes a wide array of corrective, preventive and predictive maintenance tasks per SOP's. Uses diagrams, sketches, operations manuals, manufacturer's instructions and engineering specifications to facilitate maintenance task completion, including inspecting and repairing pumps, fans, mechanical drives, seals, replacing components, etc.
·  Working in a highly regulated cGMP manufacturing facility, performs a wide range of operations connected with the installation, maintenance, monitor, repair, alteration and removal of all types of mechanical and/or production equipment and machinery, and associated equipment. Provides complete written documentation of work including work orders, PM's, etc.) and maintains cGMP records related to maintenance and repairs.
·  Works in a Clean Room environment.
·  Working in a highly regulated cGMP manufacturing facility, performs a wide range of operations connected with the installation, maintenance, monitor, repair, alteration and removal of all types of mechanical and/or production equipment and machinery, and/or utility piping systems, and associated equipment. Assists with planning, development and layout of such operations. Assists in the inspection, testing, repairing and removal of chemical process equipment including instruments, electrical and /or mechanical components. Completes training requirements as defined in training plan. Provides complete written documentation of work including work orders, PM's, etc. ) and maintains cGMP records related to maintenance and repairs.
·  May, but not limited to, operating clean utility production equipment including filters, softeners, reverse osmosis systems, deionization systems, stills, clean steam generators, pumps, controls, and distribution systems. Perform troubleshooting and repair of clean utility systems. Take periodic readings of quality control/information devices, analyzing data and identifying trends and taking corrective action accordingly. Operate CIP systems. Troubleshoot autoclaves, glass washers, dry heat ovens, and perform other process support functions.
·  May, but not limited to, maintaining building electrical distribution systems, utility systems, and production equipment in a cGMP compliant manner and good working order under the direction of Supervisor. Demonstrate proven ability to run electrical conduit and wiring installations. Perform electrical troubleshooting and repair of circuits and devices, motors, switches, and other associated equipment. Operate switches at 4,160, 13,200V. and 34.5kv.

HVAC:

·  May, but not limited to, performing refrigeration troubleshooting and repair of refrigeration circuits and compressors for cold storage boxes, freezers and cascade systems, etc. Work with all common refrigerants, reclaiming refrigerants and documenting refrigerant inventories, and documenting significant losses according to EPA requirements. Perform troubleshooting and repair of HVAC systems including fans, dampers, diffusers, filters, cooling and heating coils, control devices and valves.
·  Performs refrigeration troubleshooting, and repair of refrigeration circuits and compressors, for cold storage boxes, freezer and cascade systems, etc. Works with all common refrigerants. Reclaims refrigerants and documents refrigerant inventories. Documents significant losses according to EPA requirements.
·  Performs troubleshooting and repair of HVAC systems including fans, dampers, diffusers, filters, cooling and heating coils, control devices and valves

ADDITIONAL KNOWLEDGE (Preferred):

·  Pneumatic (e.g., valves, cylinders, etc.); Basic electrical systems (e.g., starters, fuses, contacts, relays); Mechanical systems (e.g., gear boxes, chains, sprockets, motors, seals, bearings, etc.) ; PLC (e.g., industrial maintenance, computer control systems, etc.); Vision Systems; Servo drives (e.g., intelligent/robotic motors, in-coders, etc.;Troubleshooting(e.g., diagnostics, problem solving, etc.); Schematics (e.g., electrical blueprints with switches, starters, maps, relays, fuses, etc.).; Ceramic and peristaltic Pumps (e.g., troubleshooting, replacing seals/motors, understanding specs, etc.); Packaging Lines (e.g., bottling, labeling, etc.).

EDUCATION & EXPERIENCE
Education:

Minimum required: High School diploma or GED equivalent. • Demonstrated thorough knowledge of general maintenance procedures, or related field, or equivalent combination of education and work experience.

Preferred: Technical/tradeschool specializing in electrical or mechanical systems

Job-related Professional License(s) or Certification(s):
Required: Must have pertinent experiencing one or more of the following disciplines: Plumbing, pipe fitting, welding, electrical, refrigeration, HVAC, machinist, steam fitter, or boiler mechanic. May require license in electrical, Black Seal High Pressure, or certification in HVAC.

Job-related Experience:
Minimum (required): Typically 4 to 6 years experience as a Master Maintenance Mechanic or equivalent, and 3 years experience troubleshooting industrial mechanical systems and electrical systems.
Preferred: 6+ years' work related experience.

Other Qualifications:
Must be able to work all shifts. Experience working in a GMP, clean room environment. Must be able to work in a team environment. Additionally, must be able to meet the demands of the facility in urgent and emergency situations by being available to work overtime, and possibly weekends and holidays.

·  Who we are

At Roche, 94,000 people across 100 countries are pushing back the frontiers of healthcare. Working together, we've become one of the world's leading research-focused healthcare groups. Our success is built on innovation, curiosity and diversity.

Roche is an equal opportunity employer and strictly prohibits unlawful discrimination based upon an individual's race, color, religion, gender, sexual orientation, gender identity/expression, national origin/ancestry, age, mental/physical disability, medical condition, marital status, veteran status, or any other characteristic protected by law.